LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 250 (Front Suspension System) >> Removal & Installation >> Stabilizer Bar >> Installation

Stabilizer Bar: Installation

WARNING: This page is about a different car, the 2004 Toyota Tundra, 2003 Toyota Tundra, and 2002 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Tighten stabilizer-to-lower control arm nuts to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals