LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 228 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Rear Wheel Cylinder >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2003 Toyota Prius and 2002 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

With brake drum and shoes removed, disconnect brakeline from wheel cylinder. Remove mounting bolts and remove wheel cylinder. To install, reverse removal procedure. Check and adjust rear brake shoe clearance. See REAR BRAKE SHOES  under ADJUSTMENTS. Bleed brake system. See BLEEDING BRAKE SYSTEM .

scientia non olet · About LEMON Manuals