Crankshaft, Main & Connecting Rod Bearings
WARNING: This page is about a different car, the 2002 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.
CRANKSHAFT, MAIN & CONNECTING ROD BEARINGS
| Application |
In. (mm) |
| Crankshaft |
| End Play |
| Standard |
.0008-.0087 (.020-.220) |
| Wear Limit |
.0118 (.300) |
| Runout |
.0031 (0.08) |
| Main Bearings |
| Journal Diameter |
| Size Mark "00" |
2.63779 (67.000) |
| Size Mark "01" |
2.63775 (66.999) |
| Size Mark "02" |
2.63771 (66.998) |
| Size Mark "03" |
2.63767 (66.997) |
| Size Mark "04" |
2.63763 (66.996) |
| Size Mark "05" |
2.63759 (66.995) |
| Size Mark "06" |
2.63755 (66.994) |
| Size Mark "07" |
2.63751 (66.993) |
| Size Mark "08" |
2.63747 (66.992) |
| Size Mark "09" |
2.63743 (66.991) |
| Size Mark "10" |
2.63739 (66.990) |
| Size Mark "11" |
2.63735 (66.989) |
| Size Mark "12" |
2.63731 (66.988) |
| Journal Out-Of-Round |
.0008 (.020) |
| Journal Taper |
.0008 (.020) |
| Oil Clearance |
| No. 1 & 5 |
| Standard |
.0007-.0013 (.018-.033) |
| Wear Limit |
.0017 (.043) |
| All Others |
| Standard |
.0011-.0018 (.028-.046) |
| Wear Limit |
.0022 (.056) |
| Connecting Rod Bearings |
| Journal Diameter |
| Size Mark "1" |
2.0470-2.0472 (51.994-52.999) |
| Size Mark "2" |
2.0468-2.0470 (51.989-51.994) |
| Size Mark "3" |
2.0465-2.0468 (51.981-51.989) |
| Journal Out-Of-Round |
.0008 (.020) |
| Journal Taper |
.0008 (.020) |
| Oil Clearance |
| Standard |
.0008-.0019 (.020-.048) |
| Wear Limit |
.0026 (.066) |