LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (Computer Relearn Procedures) >> Erasure Of Transponder Key Code (Except PRIUS) >> Using TOYOTA Hand-Held Tester >> Avalon, Camry (Up To Jan. 2003 Production), Camry Solara, Highlander, MR2, RAV4 & Sienna

Avalon, Camry (Up To Jan. 2003 Production), Camry Solara, Highlander, MR2, RAV4 & Sienna

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2003 Toyota Tundra, 2003 Toyota Tacoma, 2003 Toyota Sienna, 2003 Toyota Sequoia, and 2003 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect hand-held tester to data link connector No. 3. When using hand-held tester, more detailed procedures may be displayed on tester while performing this procedure.
  2. Insert registered master key in ignition lock cylinder. Turn ignition on. Request KEY CODE DELETION from hand-held tester. Ensure SECURITY indicator light flashes. SECURITY indicator light is displayed as a vehicle icon near the center of the tachometer.
  3. Within 10 seconds of requesting KEY CODE DELETION on hand-held tester, remove master key from ignition lock cylinder. Procedure is now complete and transponder key code should now be erased. If master key cannot be removed from ignition lock cylinder, transponder key code erasure is cancelled and SECURITY indicator light will turn off.
scientia non olet · About LEMON Manuals