Auto Lock/Unlock Function: Programming
WARNING: This page is about a different car, the 2003 Toyota Camry and 2002 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
- Place gearshift lever in Park and close all doors. Unlock all doors with driver door power door lock switch. Turn ignition to ON position. Within 5 seconds of turning ignition switch to ON position, depress and hold driver door power door lock switch in LOCK position for about 5 seconds.
- OPEN DOOR indicator light, located on instrument cluster, will flash to indicate which mode has been selected and programmed into memory. Mode toggles through from Mode 1 to Mode 4.
- One flash of OPEN DOOR indicator light indicates Mode 1 has been selected and stored in body control ECU memory.
- Two flashes of OPEN DOOR indicator light indicates Mode 2 has been selected and stored in body control ECU memory.
- Three flashes of OPEN DOOR indicator light indicates Mode 3 has been selected and stored in body control ECU memory.
- Four flashes of OPEN DOOR indicator light indicates Mode 4 has been selected and stored in body control ECU memory.
- If mode selected and stored in body control ECU memory is not correct, repeat step 1 until correct mode is selected and stored.