LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 191 (Timing Belt Replacement - 4.3L V8) >> Removal & Installation >> Cooling System Bleeding

Cooling System Bleeding

WARNING: This page is about a different car, the 2002 Lexus LS 430 and 2002 Lexus GS 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fill cooling system. Install radiator cap. Move heater control to warmest position. Start engine. Maintain engine speed at 2000-2500 RPM until engine is at normal operating temperature.
  2. Shut engine off. Allow engine to cool. Recheck coolant level. Fill coolant level to FULL line on coolant reservoir if necessary.
scientia non olet · About LEMON Manuals