LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 190 (Engine Control System Self Diagnostics (1GR-FE)) >> Diagnostic Tests >> DTC P0300, DTC P0301, DTC P0302, DTC P0303, DTC P0304, DTC P0305 &/Or DTC P0306 >> Notes

DTC P0300, DTC P0301, DTC P0302, DTC P0303, DTC P0304, DTC P0305 &/Or DTC P0306: Notes

WARNING: This page is about a different car, the 2003 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.

Code Definition

NOTE: Cylinder No. 1 is front cylinder on passenger's side of engine. Cylinder No. 2 is front cylinder on driver's side of engine. Cylinders No. 1, 3 and 5 are on passenger's side of engine. Cylinders No. 2, 4 and 6 are on driver's side of engine.
NOTE: For any particular 200 revolutions of engine, misfiring which could result in overheating of catalyst is detected. This will cause MIL to blink (1 trip detection logic).
NOTE: For any particular 1000 revolutions of engine, misfiring which could result in a deterioration of emissions. This will cause MIL to light up (2 trip detection logic).