LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 188 (Front Suspension) >> Removal & Installation >> Shock Absorber With Coil Spring >> Installation

Shock Absorber With Coil Spring: Installation

WARNING: This page is about a different car, the 2004 Lexus LS 430, 2003 Lexus LS 430, and 2002 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse removal procedure. Tighten all fasteners to specification. Stabilize suspension before torquing bolt for shock absorber to shock absorber lower bracket. See TORQUE SPECIFICATIONS .
  2. Check front wheel alignment. See appropriate SPECIFICATIONS & PROCEDURES article in WHEEL ALIGNMENT.
scientia non olet · About LEMON Manuals