LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 184 (Hydraulic Brake Booster) >> Removal & Installation >> Hydraulic Brake Booster Assembly >> Disposal Of Accumulator

Disposal Of Accumulator

WARNING: This page is about a different car, the 2002 Toyota Prius, 2002 Toyota Land Cruiser, 2002 Toyota 4Runner, 2001 Toyota Prius, and 2001 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Never cut at a stretch.

Place accumulator in a vise, cover it with a cloth over a saw, then cut the accumulator body slowly. See Fig 1. When the outer body of the accumulator is cut, gas will discharge.

Fig 1: Disposing Of Accumulator
G00217936Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002


For disposal procedures see DISPOSAL OF ACCUMULATOR .



For disposal procedures, see DISPOSAL OF ACCUMULATOR .