Hydraulic Brake Booster: Reassembly
WARNING: This page is about a different car, the 2002 Toyota Prius, 2002 Toyota Land Cruiser, 2002 Toyota 4Runner, 2001 Toyota Prius, and 2001 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Be careful not to damage the rubber lips on the pistons, when reassembling.
Reassemble in reverse order of removal. To install accumulator bracket, adjust to secure the standard clearance (A, B and C). See Fig 1
Standard Clearance
- A + B: 0.161 inches (4.1 mm) or less
- C: 0.012-0.150 inches (3.8 mm)
For reassembly procedures, see REASSEMBLY .
Reassemble in reverse order of removal.