LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 180 (Electronic Suspension) >> Self-Diagnostic System >> Clearing Diagnostic Trouble Codes >> Using Scan Tool

Using Scan Tool

WARNING: This page is about a different car, the 2003 Lexus LS 430, 2002 Lexus LS 430, and 2001 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. Hook up LEXUS hand-held tester to the (DLC3). See Figure.
  2. Turn ignition switch to ON. Operate the LEXUS hand-held tester to erase codes. Refer to operator's manual for further details.
scientia non olet · About LEMON Manuals