LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 179 (Wiper System & Washer System) >> System Tests >> Test No. 6: Wiper Blade Contacts Body When Wiper Switch Is In Hi Position; Or Wiper Blade Does Not Retract Or Retracts To Wrong Position When Wiper Switch Is Turned Off

Test No. 6: Wiper Blade Contacts Body When Wiper Switch Is In Hi Position; Or Wiper Blade Does Not Retract Or Retracts To Wrong Position When Wiper Switch Is Turned Off

WARNING: This page is about a different car, the 2002 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check wiper arm adjustment and blade position. See WIPER ARMS  under ADJUSTMENTS. If wiper arm adjustment is okay, go to next step.
  2. Check wiper portion of wiper/washer switch. See WIPER/WASHER SWITCH  under COMPONENT TESTS. If wiper/washer switch is okay, go to next step.
  3. Check wiring harness and connectors between wiper/washer switch and front wiper motor. Also check power and ground circuits. See WIPER/WASHER in SYSTEM WIRING DIAGRAMS article. After repairs have been made, perform confirmation test. See CONFIRMATION TEST .
scientia non olet · About LEMON Manuals