Removal & Installation (Rear Doors)

WARNING: This page is about a different car, the 2002 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

Remove armrest base panel with power window switch by prying up at rear of panel. Disconnect electrical harness connector and separate power window switch from base panel. Using screwdriver with tape applied to tip, remove rear guide bracket garnish.

Fig 1: Removing Door ECU From Armrest (Driver Door Shown - Front Passenger Door Is Similar)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Exploded View Of Front Door

Fig 3: Exploded View Of Rear Door