Front Sensor Removal & Installation
WARNING: This page is about a different car, the 2003 Toyota Prius, 2002 Toyota Prius, and 2001 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
Remove the front wheel. Remove fender liner. Disconnect the speed sensor connector and resin clip. Remove the 2 clamp bolts holding the sensor wiring harness from the body and shock absorber. Remove the installation bolt and front speed sensor from the steering knuckle. To install, reverse removal procedures. Tighten wheel speed sensor mounting bolts to specifications. See TORQUE SPECIFICATIONS .