LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 170 (Power Seats) >> System Tests >> Test No. 17: Driver & Passenger Seat Heaters Do Not Operate

Test No. 17: Driver & Passenger Seat Heaters Do Not Operate

WARNING: This page is about a different car, the 2002 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check SEAT HTR (20-amp) fuse located in driver side junction block. See Figure. If fuse is okay, go to next step. If fuse is not okay, replace fuse and repair circuit as required. If fuse is okay, check wiring harness and connectors between power seat ECU and battery and repair as necessary. See MEMORY SYSTEMS in SYSTEM WIRING DIAGRAMS article. After repairs have been made, perform confirmation test. See CONFIRMATION TEST .
  2. Remove ignition No. 1 relay from driver side junction block. Check ignition No. 1 relay. See IGNITION NO. 1 RELAY  under COMPONENT TESTS. If ignition No. 1 relay is okay, go to next step.
  3. Check wiring harnesses and connectors between battery and seat heater switches and between seat heater switches and seat heaters. Repair wiring harnesses and connectors as necessary.
scientia non olet · About LEMON Manuals