LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 167 (Power Door Locks & Liftgate) >> Removal & Installation >> Door Lock Assembly (Rear) >> Removal

Door Lock Assembly (Rear): Removal

WARNING: This page is about a different car, the 2003 Lexus RX 300 and 2002 Lexus RX 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear door trim panel. See DOOR TRIM PANEL (REAR) .
  2. Remove the child lock cover. See Figure.
  3. Remove the 4 Torx screws and door lock.
  4. Disconnect the 2 connectors.
  5. Remove the 2 screws and door lock cover.