LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 167 (Power Door Locks & Liftgate) >> Circuit Tests >> Door Key Lock & Unlock Switch Circuit (Front) >> Circuit Description

Circuit Description

WARNING: This page is about a different car, the 2003 Lexus RX 300 and 2002 Lexus RX 300. However, it is still accessible from the selected car via links, so may be relevant.

The door key lock and unlock switch is built in the door key cylinder. When the key is turned to the lock side, terminal No. 3 of the switch is grounded and when the key is turned to the unlock side, terminal No. No. 2 of the switch is grounded. The door key lock and unlock switch can be checked using DTC check. See DTC B1222/22: DOOR LOCK SWITCH CIRCUIT (DRIVER) or DTC B1224/24: DOOR LOCK SWITCH CIRCUIT (PASSENGER) under DIAGNOSTIC TESTS under MULTIPLEX COMMUNICATION SYSTEM article under COMMUNICATION DEVICES in ACCESSORIES & EQUIPMENT. For driver door key lock and unlock switch circuit diagram, see Fig 1. For passenger door key lock and unlock switch circuit diagram, see Fig 2.

Fig 1: Identifying Driver Door Lock Motor, Key Lock/Unlock Switch & Unlock Detection Switch Circuit
G00196896Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Identifying Passenger Door Lock Motor, Key Lock/Unlock Switch & Unlock Detection Switch Circuit
G00196897Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002