LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 163 (Moon Roof) >> Pin Voltage Tests

Pin Voltage Tests

WARNING: This page is about a different car, the 2003 Lexus RX 300 and 2002 Lexus RX 300. However, it is still accessible from the selected car via links, so may be relevant.

Using a DVOM connected to ground, backprobe to measure voltage or resistance at appropriate terminal at moon roof ECU harness connector unless otherwise specified. See CONNECTOR IDENTIFICATION . See MOON ROOF ECU PIN VOLTAGE CHART  table.

MOON ROOF ECU PIN VOLTAGE CHART

Terminal No. (Symbols), Wiring Color Condition STD Voltage
M3-5 (B) - M3-7 (E), Blue/Orange - White/Black Always 10-14 Volts
M3-7 (E) - Body Ground, White/Black Always 10-14 Volts
M3-8 (IG) - M3-7 (E), Black/Red - White/Black Ignition Switch ON 10-14 Volts
M3-8 (IG) - M3-7 (E), Black/Red - White/Black Ignition Switch OFF Or ACC Less Than 1 Volt
M3-9 (OPN) - M3-7 (E), Pink - White/Black Moon Roof Control Switch OPEN 10-14 Volts
M3-9 (OPN) - M3-7 (E), Pink - White/Black Others Less Than 1 Volt
M3-10 (CLS) - M3-7 (E), Green/Yellow - White/Black Moon Roof Control Switch CLOSE 10-14 Volts
M3-10 (CLS) - M3-7 (E), Green/Yellow - White/Black Others Less Than 1 Volt