Slide Close Operation
WARNING: This page is about a different car, the 2003 Lexus RX 300 and 2002 Lexus RX 300. However, it is still accessible from the selected car via links, so may be relevant.
When the moon roof is fully opened (limit SW No. 1 off, limit SW No. 2 off), and the moon roof control SW is kept pressed to CLOSE position for approximately 0.3 seconds or longer, a signal is input from TERMINAL 6 of the moon roof control SW to TERMINAL 10 of the moon roof control ECU. This activates the relay and rotates the motor to close the moon roof automatically. Then, when the limit SW No. 2 is turned on, the pulse signal sent from the HALL IC activates the relay, and determines that the moon roof is closed fully, and stops the motor. If other operation SW or the close SW is operated while the moon roof is being closed, the relay is activated to stop the moon roof operation.