Catching Prevention Function
WARNING: This page is about a different car, the 2003 Lexus RX 300 and 2002 Lexus RX 300. However, it is still accessible from the selected car via links, so may be relevant.
During slide close or tilt down operation, if the relay detects a catching load from the changes in the rotation of the motor, the operation is stopped, and the motor is rotated in the reverse direction.
- Slide Close Operation - The moon roof is moved approximately 200 mm in the reverse direction (slide open) after a catching load has been detected. However, if the full open position is detected before moving approximately 200 mm, the reverse movement is stopped.
- Tilt Down Operation - If a catching load is detected, the moon roof is moved in the reverse direction until fully tilted up.