LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 162 (Power & Heated Seats) >> Removal & Installation >> Front Seat >> Installation

Front Seat: Installation

WARNING: This page is about a different car, the 2003 Lexus RX 300 and 2002 Lexus RX 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front seat. Mount the front seat to the vehicle. Connect the connectors. Slide the front seat to the rearmost position. Tighten the bolts on the front side temporarily, from the bolt on the outer side tighten them completely. See TORQUE SPECIFICATIONS  table. Slide the front seat to the frontmost position. Tighten the bolts on the rear side temporarily, from the bolt on the outer side tighten them completely. See TORQUE SPECIFICATIONS  table.
  2. Install the seat tracks.
scientia non olet · About LEMON Manuals