Power Seat Switch (Driver)
WARNING: This page is about a different car, the 2003 Lexus RX 300 and 2002 Lexus RX 300. However, it is still accessible from the selected car via links, so may be relevant.
Inspect the driver power seat switch continuity. See CONNECTOR IDENTIFICATION .
- Slide Switch
See INSPECTING SLIDE SWITCH CONTINUITY table.INSPECTING SLIDE SWITCH CONTINUITYSwitch Position Tester Connection Specified Condition FRONT 1 - 9, 4 - 6 Continuity OFF 4 - 6, 4 - 9 Continuity BACK 1 - 6, 4 - 9 Continuity - Front Vertical Switch
See INSPECTING FRONT VERTICAL SWITCH CONTINUITY table.INSPECTING FRONT VERTICAL SWITCH CONTINUITYSwitch Position Tester Connection Specified Condition UP 1 - 10, 4 - 5 Continuity OFF 4 - 5, 4 - 10 Continuity DOWN 1 - 5, 4 - 10 Continuity - Lifter Switch -
See INSPECTING LIFTER SWITCH CONTINUITY table.INSPECTING LIFTER SWITCH CONTINUITY
Switch Position Tester Connection Specified Condition UP 1 - 7, 4 - 8 Continuity OFF 4 - 7, 4 - 8 Continuity DOWN 1 - 8, 4 - 7 Continuity - Reclining Switch -
See INSPECTING RECLINING SWITCH CONTINUITY table.INSPECTING RECLINING SWITCH CONTINUITY
Switch Position Tester Connection Specified Condition FORWARD 1 - 3, 2 - 4 Continuity OFF 2 - 4, 3 - 4 Continuity REAR 1 - 2, 3 - 4 Continuity - If continuity is not as specified, replace the switch. See FRONT SEAT under REMOVAL & INSTALLATION.