Rear Washer Nozzle: Inspection
WARNING: This page is about a different car, the 2003 Lexus RX 300 and 2002 Lexus RX 300. However, it is still accessible from the selected car via links, so may be relevant.
- While operating the washer, check whether the upper point where the washer fluid hits the back door glass and the surge area are within the range indicated by the hatched line. See Fig 1.
- A
Approximately 4.264 in. (108.3 mm) - B
Approximately 5.91 in. (150 mm)
- A
- Check if the lower point where the washer fluid hits the back door glass is within the range of the wiping pattern (they are of the glass which is wiped by the wiper blades.