Headlight Beam Level Control
WARNING: This page is about a different car, the 2003 Lexus RX 300 and 2002 Lexus RX 300. However, it is still accessible from the selected car via links, so may be relevant.
This system calculates changes in the illuminating angle from changes in the vehicle height and axle distance based on the information on the vehicle height detected by the height control sensors installed at the front and rear of the vehicle. Iinformation on the vehicle speed and acceleration output from the vehicle skid control (VSC) system to reversely operate the reflector by the obtained illuminating angle, through actuators, in order to always keep the beam axis constant. If an error occurs in this system, the headlight beam level control warning light in the combination meter lights up to warn the driver.