LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 160 (Automatic Headlights & Lighting) >> Component Tests >> Headlight Beam Level Control Actuator

Headlight Beam Level Control Actuator

WARNING: This page is about a different car, the 2003 Lexus RX 300 and 2002 Lexus RX 300. However, it is still accessible from the selected car via links, so may be relevant.

Check that continuity exists between terminals No. 2 and 5. See CONNECTOR IDENTIFICATION . Check that resistance exists between terminals. See INSPECTING HEADLIGHT BEAM LEVEL CONTROL ACTUATOR RESISTANCE  table. If resistance value is not as specified, replace the actuator. See HEADLIGHTS  under REMOVAL & INSTALLATION.

INSPECTING HEADLIGHT BEAM LEVEL CONTROL ACTUATOR RESISTANCE

Terminal Resistance (Ohms)
2 - 1 26-30
2 - 3 26-30
2 - 4 26-30
2 - 6 26-30
5 - 1 26-30
5 - 3 26-30
5 - 4 26-30
5 - 6 26-30