Glove Compartment Door Light Circuit
WARNING: This page is about a different car, the 2003 Lexus RX 300 and 2002 Lexus RX 300. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect the connector from the switch and inspect the connector on the wiring harness side. See CONNECTOR IDENTIFICATION . See INSPECTING GLOVE COMPARTMENT DOOR LIGHT CIRCUIT table. If the circuit is not as specified, inspect the power source or wiring harness.
INSPECTING GLOVE COMPARTMENT DOOR LIGHT CIRCUIT
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 2 - Ground | Constant | Continuity |
| 1 - Ground | Light Control Switch OFF | No Voltage |
| 1 - Ground | Light Control Switch TAIL Or HEAD | B+ Voltage |