LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 158 (Steering Column Switches) >> Component Tests >> Turn Signal Flasher

Turn Signal Flasher

WARNING: This page is about a different car, the 2003 Lexus RX 300 and 2002 Lexus RX 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the positive (+) lead from the battery to terminals 1 and 4, and the negative (-) lead to terminal 7. See CONNECTOR IDENTIFICATION .
  2. Connect 2 turn signal bulbs to terminal 2 and 3 each and connect the other side of them to the negative (-) battery terminal.
  3. Check that the LH bulbs flush when terminal 5 is connected to the negative (-) battery terminal.
  4. Check that the RH bulbs flush when terminal 6 is connected to the negative (-) battery terminal.
  5. Disconnect terminal 1 from the positive (+) battery terminal.
  6. Check that the LH and RH bulbs flush when terminal 8 is connected to the negative (-) battery terminal.
scientia non olet · About LEMON Manuals