LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 157 (Instrument Panel) >> Removal & Installation >> Combination Meter >> Disassembly & Reassembly

Disassembly & Reassembly

WARNING: This page is about a different car, the 2003 Lexus RX 300 and 2002 Lexus RX 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the combination meter cover by remove the 9 screws. See Fig 1.
  2. Remove the A/C and combination meter integrated ECU. Remove the 4 screws. Remove the A/C and combination meter integrated ECU and 2 combination meter wires.
  3. Remove the combination meter circuit plate. Remove the 4 screws and 6 connectors. Remove the combination meter circuit plate from the meter case.
  4. Remove the meter hood and combination meter glass.
  5. Remove the combination meter plate by removing a screw.
  6. Remove the speedometer assembly by removing the 2 screws. Remove the No. 4 combination meter plate.
  7. For reassembly, reverse the disassembly procedure.
Fig 1: Exploded View Of Combination Meter Components
G99A51516Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002