Room Lamp Assembly No. 1
WARNING: This page is about a different car, the 2002 Lexus ES 300. However, it is still accessible from the selected car via links, so may be relevant.
Inspect the continuity between terminals at each switch position of the room lamp assembly No. 1. See CONNECTOR IDENTIFICATION . See INSPECTING ROOM LAMP ASSEMBLY NO. 1 CONTINUITY table.
INSPECTING ROOM LAMP ASSEMBLY NO. 1 CONTINUITY
| Switch Operation | Tester Connection | Specified Condition |
|---|---|---|
| OFF | ..... | No Continuity |
| DOOR | 1 - 2 | Continuity |
| ON | 1 - 3 | Continuity |