LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Wiper/Washer Systems) >> Removal & Installation >> Rain Sensor >> Removal

Rain Sensor: Removal

WARNING: This page is about a different car, the 2003 Lexus ES 300 and 2002 Lexus ES 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release the rain sensor cover. See Fig 1.
  2. Pull out the stopper and release the lock. See Fig 2.
  3. Disconnect the connector and remove the rain sensor.
Fig 1: Releasing Rain Sensor Cover
G00182448Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Releasing Lock
G00182449Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002