LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Power Seats) >> Removal & Installation >> Seat Heater (Seat Cushion) >> Removal

Seat Heater (Seat Cushion): Removal

WARNING: This page is about a different car, the 2002 Lexus ES 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the position control ECU assembly. See POSITION CONTROL ECU ASSEMBLY .
  2. Remove the hog rings. Remove the separate type front seat cushion cover.
    3. CAUTION: Be careful not to damage the seat cushion cover.
  3. Cut off the tack pins which fasten the seat heater. Remove the left hand front seat cushion heater assembly.
scientia non olet · About LEMON Manuals