LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Power Seats) >> Removal & Installation >> Power Seat Motor >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Lexus ES 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat back heater. See SEAT HEATER (SEAT BACK) .
  2. Remove the screws and the left hand lumbar support adjuster assembly. Remove the left hand lumbar support adjuster assembly.
  3. Separate each connector from the left hand front seat wire. Remove the 2 screws each to remove the front slide power seat motor assembly (sliding), power seat motor assembly (reclining), power seat motor assembly (front vertical) and front up/down power seat motor assembly (lifter). Remove the power seat motor.
  4. For installation, reverse removal procedure.
scientia non olet · About LEMON Manuals