Torque Specifications: TACOMA
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2003 Toyota Tundra, 2003 Toyota Tacoma, 2003 Toyota Sienna, 2003 Toyota Sequoia, and 2003 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS (TACOMA)
| Application |
Ft. Lbs. (N.m) |
| A/F Sensor Retaining Nut |
15 (20) |
| Air Intake Chamber Bolt/Nut |
13 (18) |
| Air Intake Chamber Support Brace Bolt |
30 (41) |
| ECT Sensor |
15 (20) |
| Fuel Crossover Pipe Union Bolt |
25 (34) |
| Fuel Inlet Pipe-To-Fuel Rail Union Bolt |
25 (34) |
| Fuel Rail-To-Intake Manifold Bolt |
10 (13.0) |
| Fuel Tank Protector Bolt |
22 (30) |
| Heated Oxygen Sensor-To-Exhaust Pipe Retaining Nut |
15 (20) |
| Intake Air Connector Bolt/Nut |
13 (18) |
| Intake Manifold Bolt/Nut |
13 (18) |
| Intake Manifold Support Brace Bolt |
13 (18) |
| Knock Sensor |
29 (39) |
| Oil Cooler Line-To-Transmission Nut |
25 (34) |
| PNP Switch Retaining Bolt |
10 (13.0) |
| Power Steering Pressure Switch |
15 (20) |
| Throttle Body Bolt/Nut |
13 (18) |
| Vehicle Speed Sensor Retaining Bolt |
|
| INCH Lbs. (N.m) |
| Camshaft Position Sensor Bolt |
71 (8) |
| Coolant By-Pass Pipe-To-Cylinder Block Bolt/Nut |
71 (8) |
| Crankshaft Position Sensor Bolt |
71 (8) |
| Emission Control Valve Bracket Bolt |
71 (8) |
| Fuel Inlet Pipe-To-Intake Manifold Clamp Bolt |
71 (8) |
| Fuel Pressure Regulator Bolt |
71 (8) |
| Fuel Pump Mounting Bracket-To-Fuel Tank Bolt |
35 (4) |
| IAC Valve Bolt |
|
| Ignition Coil Bolt |
71 (8) |
| Oil Cooler Clamp Bolt |
44 (5) |
| PNP Switch Retaining Nut |
62 (7) |
| Upper Timing Belt Cover Bolt |
80 (9) |