LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Engine Controls - Removal & Installation - V6 & V8) >> Torque Specifications >> Land Cruiser

Land Cruiser

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2003 Toyota Tundra, 2003 Toyota Tacoma, 2003 Toyota Sienna, 2003 Toyota Sequoia, and 2003 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS (LAND CRUISER)

Application Ft. Lbs. (N.m)
Control Shaft Lever Nut 10 (13)
ECT Sensor 15 (20)
Front Fuel Pipe-To-Fuel Rail Union Bolt 29 (39)
Fuel Pulsation Damper 29 (39)
Fuel Rail-To-Intake Manifold Nut 15 (20)
Heated Oxygen Sensor-To-Exhaust Manifold 32 (43)
Heated Oxygen Sensor-To-Exhaust Pipe Retaining Nut 15 (20)
Intake Manifold Bolt/Nut 13 (18)
Knock Sensor 33 (45)
PNP Switch Retaining Bolt 10 (13)
Rear Seat Bolt 30 (41)
Throttle Body Bolt/Nut 13 (18)
Vehicle Speed Sensor Retaining Bolt 12 (16)
INCH Lbs. (N.m) 
Accelerator Pedal Position Sensor Retaining Screw 44 (5)
Camshaft Position Sensor Bolt & Stud Bolt 62 (7)
Crankshaft Position Sensor Bolt 62 (7)
Driver's Side Upper Timing Belt Cover Bolt/Nut 62 (7)
Front Fuel Pipe Clamp Bolt 62 (7)
Fuel Pressure Regulator Bolt 62 (7)
Fuel Pump Resistor Bolt 80 (9)
Fuel Pump Retaining Plate-To-Fuel Tank Bolt 35 (4)
Fuel Return Pipe-To-Fuel Rail Clamp Bolt 62 (7)
Ignition Coil Bolt 62 (7)
MAF Sensor Screw 18 (2)
Oil Cooler Pipe Bolt 62 (7)
PNP Switch Retaining Nut 62 (7)