Torque Specifications: Highlander
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2003 Toyota Tundra, 2003 Toyota Tacoma, 2003 Toyota Sienna, 2003 Toyota Sequoia, and 2003 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS (HIGHLANDER)
| Application |
Ft. Lbs. (N.m) |
| A/F Sensor |
|
| Air Intake Chamber Bolt/Nut |
32 (43) |
| Control Lever Nut |
10 (13) |
| Coolant Housing Bolt/Nut |
11 (15) |
| ECT Sensor |
|
| Engine Hanger Bolt |
29 (39) |
| Fuel Pulsation Damper |
24 (33) |
| Heated Oxygen Sensor |
15 (20) |
| Intake Manifold Bolt/Nut |
11 (15) |
| Knock Sensor |
29 (39) |
| No. 1 Fuel Pipe-To-Fuel Rail Bolt |
24 (33) |
| No. 1 Fuel Pipe-To-Intake Manifold Clamp Bolt |
15 (20) |
| No. 1 Intake Air Control Valve-To-Air Intake Chamber Nut |
15 (20) |
| No. 2 Intake Air Control Valve Nut |
11 (15) |
| Power Steering Pressure Switch |
15 (20) |
| Suspension Upper Brace Nut |
59 (80) |
| Throttle Body Bracket Bolt |
15 (20) |
| INCH Lbs. (N.m) |
| Camshaft Position Sensor Bolt |
71 (8) |
| Crankshaft Position Sensor Bolt |
71 (8) |
| Fuel Pump Retaining Plate-To-Fuel Tank Bolt |
|
| Fuel Rail-To-Intake Manifold Bolt |
89 (10) |
| IAC Valve Bolt |
35 (4) |
| Ignition Coil Bolt |
71 (8) |
| PNP Switch Retaining Bolt |
44 (5) |
| PNP Switch Retaining Nut |
62 (7) |
| Throttle Body-To-No. 1 Intake Air Control Valve Bolt |
62 (7) |
| TP Sensor Retaining Screw |
18 (2) |
| VVT Camshaft Timing Oil Control Valve Retaining Bolt |
71 (8) |