Torque Specifications: CAMRY
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2003 Toyota Tundra, 2003 Toyota Tacoma, 2003 Toyota Sienna, 2003 Toyota Sequoia, and 2003 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS (CAMRY)
| Application |
Ft. Lbs. (N.m) |
| A/F Sensor |
|
| Air Intake Chamber Bolt/Nut |
32 (43) |
| Air Intake Chamber Bolt/Nut |
21 (28) |
| Air Intake Chamber Support Brace Bolt |
15 (20) |
| Control Lever Nut |
10 (13) |
| Coolant Housing Bolt/Nut |
11 (15) |
| ECT Sensor |
|
| EGR Gas Temperature Sensor |
15 (20) |
| Engine Hanger Bolt |
29 (39) |
| Fuel Pulsation Damper |
24 (33) |
| Heated Oxygen Sensor |
32 (43) |
| Intake Air Control Valve Nut |
11 (15) |
| Intake Manifold Bolt/Nut |
11 (15) |
| Knock Sensor |
29 (39) |
| No. 1 Fuel Pipe-To-Fuel Rail Bolt |
24 (33) |
| No. 1 Fuel Pipe-To-Intake Manifold Clamp Bolt |
15 (20) |
| No. 1 Intake Air Control Valve Bolt/Nut |
|
| Power Steering Pressure Switch |
15 (20) |
| Suspension Upper Brace Nut |
59 (80) |
| Throttle Body Bolt/Nut |
14 (19) |
| INCH Lbs. (N.m) |
| Camshaft Position Sensor Bolt |
71 (8) |
| Camshaft Timing Oil Control Valve Bolt |
71 (8) |
| Crankshaft Position Sensor Bolt |
71 (8) |
| EGR Pipe Nut |
106 (12) |
| EGR Position Sensor-To-EGR Valve Nut |
|
| EGR Valve Retaining Nut |
106 (12) |
| Emission Control Valve Set Nut |
71 (8) |
| Fuel Pump Retaining Plate-To-Fuel Tank Bolt |
35 (4) |
| Fuel Rail-To-Intake Manifold Bolt |
89 (10) |
| Ignition Coil Bolt |
71 (8) |
| PNP Switch Retaining Bolt |
44 (5) |
| PNP Switch Retaining Nut |
62 (7) |
| No. 2 Intake Air Control Valve Bolt/Nut |
89 (10) |
| Throttle Body Bolt/Nut |
97 (11) |
| TP Sensor Retaining Screw |
18 (2) |