Land Cruiser
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2003 Toyota Tundra, 2003 Toyota Tacoma, 2003 Toyota Sienna, 2003 Toyota Sequoia, and 2003 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect electrical connector for fuel pump. See Fig 1. This is electrical connector for fuel pump and fuel gauge sending unit.
- Start engine and allow engine to idle until engine stalls. Turn ignition off.
- Disconnect negative battery cable.
- Place suitable container under fuel line connection.
- Cover fuel line connection with shop towel. Slowly loosen fuel line connection or disconnect fuel line connection, allowing any fuel pressure to be released. Once fuel pressure is released, fuel system components may be serviced.
- Reinstall electrical connector for fuel pump.