Removal & Installation (All Models)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2003 Toyota Tundra, 2003 Toyota Tacoma, 2003 Toyota Sienna, 2003 Toyota Sequoia, and 2003 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Ignition switch is located at bottom of upper steering column bracket. See Fig 1. If necessary to remove steering column for access to ignition switch, see appropriate STEERING COLUMNS article in STEERING. Remove screws and ignition switch. To install, reverse removal procedure.