LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Engine Controls - Removal & Installation - V6 & V8) >> Engine Sensors & Switches >> Airflow Meter >> Removal & Installation (Camry Solara)

Removal & Installation (Camry Solara)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2003 Toyota Tundra, 2003 Toyota Tacoma, 2003 Toyota Sienna, 2003 Toyota Sequoia, and 2003 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect electrical connector at airflow meter. Airflow meter is bolted to side of air intake hose, near upper cap on air cleaner assembly.
  2. Remove bolts, airflow meter and gasket.
  3. To install, reverse removal procedure using NEW gasket.
scientia non olet · About LEMON Manuals