Removal & Installation (Avalon, Camry, Camry Solara, Highlander & Sienna)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2003 Toyota Tundra, 2003 Toyota Tacoma, 2003 Toyota Sienna, 2003 Toyota Sequoia, and 2003 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- Remove "V" bank cover. See Figure-Figure .
- The EVAP Vacuum Switching Valve (VSV) is the front inside VSV on emission control valve set. See Figure-Figure .
- Disconnect electrical connectors and vacuum lines from vacuum switching valves on emission control valve set.
- Remove emission control valve set.
- Remove EVAP VSV from emission control valve set.
- To install, reverse removal procedure.