LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Engine Controls - Removal & Installation - V6 & V8) >> Air Induction Systems >> Intake Air Control Valve >> Removal & Installation (4Runner 4.0L)

Removal & Installation (4Runner 4.0L)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2003 Toyota Tundra, 2003 Toyota Tacoma, 2003 Toyota Sienna, 2003 Toyota Sequoia, and 2003 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Intake Air Control Valve is laser welded inside air intake chamber. If intake air control valve needs replacing, then air intake chamber must be replaced as an assembly. See Figure. No service information is provided by manufacturer.