Removal & Installation (Camry & Camry Solara)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2003 Toyota Tundra, 2003 Toyota Tacoma, 2003 Toyota Sienna, 2003 Toyota Sequoia, and 2003 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Remove "V" bank cover. Acoustic Control Induction System (ACIS) Vacuum Switching Valve (VSV) is the front outside VSV on emission control valve set. See Fig 1, Fig 2 and Fig 3 .
Disconnect electrical connectors and vacuum lines from vacuum switching valves on emission control valve set. Remove emission control valve set.
Remove ACIS VSV from emission control valve set.
To install, reverse removal procedure.

Fig 1: Locating "V" Bank Cover & Various Vacuum Switching Valves (Camry - Up To Jan. 2003 Production)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Locating Various Vacuum Switching Valves (Camry - Jan. 2003 & Later Production)

Fig 3: Locating "V" Bank Cover & Various Vacuum Switching Valves (Camry Solara)