LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Engine Controls - Removal & Installation 4-Cylinder) >> Torque Specifications >> Echo

Torque Specifications: Echo

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2003 Toyota Tacoma, 2003 Toyota RAV4, 2003 Toyota Prius, 2003 Toyota Matrix, and 2003 Toyota MR2. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS (ECHO)

Application Ft. Lbs. (N.m)
Control Lever Nut 10 (13.0)
ECT Sensor (1)
Fuel Rail-To-Cylinder Head Bolt 14 (19)
Heated Oxygen Sensor 32 (43)
Intake Manifold Bolt/Nut 22 (30)
Knock Sensor 29 (39)
Power Steering Pressure Sensor 15 (20)
Throttle Body Bolt/Nut 22 (30)
INCH Lbs. (N.m) 
Camshaft Position Sensor Bolt 71 (8)
Crankshaft Position Sensor Bolt 62 (7)
Fuel Pipe Clamp-To-Cylinder Head Bolt 80 (9)
Fuel Pump Retaining Plate-To-Fuel Tank Bolt 35 (4)
Ignition Coil Bolt 80 (9)
PNP Switch Retaining Bolt 44 (5)
PNP Switch Retaining Nut 62 (7)
Valve Cover Bolt/Nut (2) 89 (10)
Vehicle Speed Sensor Retaining Bolt
A/T 62 (7)
M/T 97 (11)
VVT Camshaft Timing Oil Control Valve Retaining Bolt 71 (8)
(1) Information is not available from manufacturer.
(2) Tighten to specification in sequence. See Figure.