LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Engine Controls - Removal & Installation 4-Cylinder) >> Torque Specifications >> CELICA

Torque Specifications: CELICA

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2003 Toyota Tacoma, 2003 Toyota RAV4, 2003 Toyota Prius, 2003 Toyota Matrix, and 2003 Toyota MR2. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS (CELICA)

Application Ft. Lbs. (N.m)
Control Lever Nut 10 (13.0)
ECT Sensor (1)
Fuel Rail-To-Cylinder Head Bolt
1ZZ-FE 14 (19)
2ZZ-GE 21 (29)
Heated Oxygen Sensor 32 (43)
Intake Manifold Bolt/Nut
1ZZ-FE 14 (19)
2ZZ-GE (2)
Intake Manifold Support Bolt/Nut
2ZZ-GE 18 (24)
Knock Sensor Retaining Nut
1ZZ-FE 33 (44)
2ZZ-GE 15 (20)
Power Steering Pressure Switch 15 (20)
Throttle Body Bolt/Nut
1ZZ-FE 15 (20)
2ZZ-GE 16 (22)
INCH Lbs. (N.m) 
Accelerator Pedal Bracket Bolt 44 (5)
Camshaft Position Sensor Bolt 80 (9)
Crankshaft Position Sensor Bolt 80 (9)
Fuel Pipe Clamp-To-Cylinder Head Bolt 80 (9)
Fuel Pump Retaining Plate-To-Fuel Tank Bolt 35 (4)
Ignition Coil Bolt 80 (9)
PNP Switch Retaining Bolt 44 (5)
PNP Switch Retaining Nut 62 (7)
Vehicle Speed Sensor Retaining Bolt
A/T 53 (6)
M/T 97 (11)
VVL Oil Control Valve Retaining Bolt
2ZZ-GE 80 (9)
VVT Camshaft Timing Oil Control Valve Retaining Bolt
1ZZ-FE 62 (7)
2ZZ-GE 71 (8)
(1) Information is not available from manufacturer.
(2) Tighten bolts/nuts "A" to 20 ft. lbs. (27 N.m) and bolt "B" to 34 ft. lbs. (46 N.m). See Figure.