LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Engine Controls - Removal & Installation 4-Cylinder) >> Ignition Systems >> Camshaft Position Sensor >> Removal & Installation (Camry & Highlander)

Removal & Installation (Camry & Highlander)

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2003 Toyota Tacoma, 2003 Toyota RAV4, 2003 Toyota Prius, 2003 Toyota Matrix, and 2003 Toyota MR2. However, it is still accessible from the selected car via links, so may be relevant.

Camshaft position sensor is located on end of cylinder head at flywheel end of engine. See Figure. Service information is not available from manufacturer except for camshaft position sensor bolt torque specification. See TORQUE SPECIFICATIONS .