LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Engine Controls - Removal & Installation 4-Cylinder) >> Fuel Systems >> Throttle Body >> Removal (Prius)

Removal (Prius)

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2003 Toyota Tacoma, 2003 Toyota RAV4, 2003 Toyota Prius, 2003 Toyota Matrix, and 2003 Toyota MR2. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS .
  1. Drain cooling system.
  2. Remove air cleaner assembly on top of engine for access to throttle body.
  3. Disconnect coolant hoses, PCV hose and electrical connectors at throttle body.
  4. Remove bolts/nuts, throttle body and gasket from intake manifold. Throttle Position (TP) sensor may be serviced. Throttle control motor is non-serviceable. If throttle control motor is defective, throttle body must be replaced.