LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Engine Controls - Removal & Installation 4-Cylinder) >> Fuel Systems >> Throttle Body >> Disassembly

Throttle Body: Disassembly

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2003 Toyota Tacoma, 2003 Toyota RAV4, 2003 Toyota Prius, 2003 Toyota Matrix, and 2003 Toyota MR2. However, it is still accessible from the selected car via links, so may be relevant.
  1. If necessary to remove TP sensor, remove TP sensor retaining screws and TP sensor from throttle body. See Fig 1. Use care not to drop or damage TP sensor.
  2. If necessary to remove accelerator pedal position sensor, remove retaining bolts and accelerator pedal position sensor from throttle body. See Fig 1. Use care not to drop or damage accelerator pedal position sensor.
Fig 1: Locating Accelerator Pedal Position Sensor, Throttle Position Sensor & Throttle Control Motor (MR2 With Sequential Manual Transaxle)
G00028687Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002