Removal (Camry Solara)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2003 Toyota Tacoma, 2003 Toyota RAV4, 2003 Toyota Prius, 2003 Toyota Matrix, and 2003 Toyota MR2. However, it is still accessible from the selected car via links, so may be relevant.
- Knock sensor is located on side of cylinder block. See Figure. Manufacturer states to remove engine with transaxle for access to knock sensor. See appropriate article in ENGINES.
- Disconnect necessary hoses for removal of intake manifold with throttle body.
- Remove engine wiring harness from engine wiring harness clamp.
- Remove bolts/nuts, engine wiring harness brackets, intake manifold with throttle body, gasket and intake manifold insulator. See Figure.
- Using Oil Pressure Switch Socket (SST 09816-30010) or equivalent socket, remove knock sensor from cylinder block.