LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Engine Controls - Removal & Installation 4-Cylinder) >> Engine Sensors & Switches >> Ignition Switch >> Removal & Installation (All Models)

Removal & Installation (All Models)

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2003 Toyota Tacoma, 2003 Toyota RAV4, 2003 Toyota Prius, 2003 Toyota Matrix, and 2003 Toyota MR2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition switch is located at bottom of upper steering column bracket. See Fig 1.
  2. If necessary to remove steering column for access to ignition switch, see appropriate STEERING COLUMNS article in STEERING.
  3. Remove screws and ignition switch.
  4. To install, reverse removal procedure.
Fig 1: Locating Ignition Switch (All Models)
G00035201Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002