Removal & Installation (Tacoma)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2003 Toyota Tacoma, 2003 Toyota RAV4, 2003 Toyota Prius, 2003 Toyota Matrix, and 2003 Toyota MR2. However, it is still accessible from the selected car via links, so may be relevant.
- Heated Air/Fuel (A/F) sensor is mounted on exhaust pipe in front of catalytic converter.
- Disconnect electrical connector for A/F sensor.
- Remove retaining nuts, A/F sensor and gasket from exhaust pipe.
- To install, reverse removal procedure using NEW gasket. Tighten A/F sensor retaining nuts to specification. See TORQUE SPECIFICATIONS .